Optical Fiber Communication Answer Key AKTU 2019 - 20 ( Q47 - 70) - Math Traders

Latest

Optical Fiber Communication Answer Key AKTU 2019 - 20 ( Q47 - 70)

                                                              AKTU Solve Paper 

                                                 Optical Fiber Communication

                                                              Year - 2019 - 20


Q47. The spectral response of an ideal photo detector depicts its efficiency as a function of

Ans.  Wavelength.

 

Q48. According to the frequency response of the photo detector the modulation frequency at which the output current decreases to ____________ of peak value

Ans.  Half.

 

Q50. In an eye diagram digital signal with very bad interface resembles the shape of

Ans.  Straight line.

 

Q51. Which among the following parameter is / are decided by the front end of receiver?

Ans.  A) sensitivity.

          B) bandwidth.

          C) both A and B.



This page is available in multiple languages select your desired language from the translation tab.

Optical Fiber Communication Answer Key AKTU


 

Q52. In an optical fibre the concept of numerical aperture is applicable in describing the ability of_______

Ans. Light collection.

 

Q53. Which among the following represents the major to minimize the in-homogeneity for Mie scattering reduction?

Ans.  A) extrusion control.

          B) increase in relative refractive index difference.

          C) removal of imperfection due to glass manufacturing process.

          D) all of the above.

 

Q54. Which among the following is regarded as an inelastic scattering of photon?

Ans.   Raman effect.

 

Q55. Which among the following is a key process adopted for the laser beam formation as it undergoes the light amplification?

Ans.  Stimulated emission.

 

Q56. For a photodiode with responsibility of 0.50 A/w and optical power of about 12µW what should be the value of generated photocurrent

Ans.   6 micro amp.

 

Q57. Which feature of an eye diagram assist in the measurement of additive noise in the signal

Ans.  Eye opening (height,p2p)

 

Q58. Which method determines the dispersion limitation of an optical link

Ans.  Rise time budget.

 

Q59. Which kind of dispersion phenomena give rise to pulse spreading in single mode fibers

Ans.  Intramodal.

 

Q60. With respect to single mode and graded index fibre which parameter specifies the propagation of polarization mode with different phase velocities and the difference between their effective refractive indices

Ans.  Birefringence.

 

Q61. Which type of scattering occurs due to interaction of light in a medium with time dependent optical density variations thereby resulting into the change of energy and path

Ans.  Stimulated brillouin scattering.

 

Q62. In an optical fiber communication system, which among the following is not a typical transmitter function?

Ans.  Recoding to match output standard

 

Q63. Which among the following is provided by an optical receiver for the regeneration of data signal with minimum error?

Ans.  Linear circuitry.

 

Q64. Which property/ies of PCM stream determine/s the fidelity to original analogue signal?

Ans.  A) sampling rate.

         B) bit depth.

         C) both A and B .

 

Q65. In single mode fiber, how does the fraction of energy travelling through bound mode appear in the cladding

Ans.  As an evanescent wave.

 

Q66. Attenuation is a loss that occurs _____

Ans. 

 

Q67. MFD defines light collecting ability of ____fiber

Ans. 

 

Q68. The path of skew rays in optical cable is

Ans.  Helical.

 

Q69. NA provides relation between

Ans. 

 

Q70. For optical amplification in LED ___________ is responsible

Ans.


Previous Page - MCQ ( Q 24 -46 )  

No comments:

Post a Comment